Automatic LDPE Film Single Screw Extruder Machine
Application
Using area: clean PE,PP film, bag, silk or material within 5% water
content
Material type: PP,PE,LDPE, LLDPE,HDPE,BOPP,CPP, PET,PA, EPE, etc
Work flow general introduction:
material can be cut, mixed, pre-homogenized and pre-dried in the
shredder drum. The whole set can complete the material cutting,
granulating and pelletizing process. Film can go directly to the
shredder drum without using crusher.
Advantages:
two people one line
power consumption: 0.27kw/kg-0.30kw/kg
processing ability:100kg/h to 1500kg/h
Machine specification:
| Model | ML75 | ML85 | ML100 | ML130 | ML160 | ML180 | ML200 |
| Screw diameter(mm) | 75 | 85 | 100 | 130 | 160 | 180 | 200 |
| Output(kg/h) | 100-120 | 100-180 | 200-300 | 400-600 | 600-800 | 800-1000 | 1200-1500 |
Machine working process:
Waste plastic material(e.g. Film, fiber) is fed into cut compactor
automatically by belt conveyor (roll-intake device is available to
equip as option). In-feed rate is controlled via motor amperage of
the cut compactor, therefore, there is no need for manual dosing by
operator.
The material is then chopped, warmed, dried and agglomerated by the
drum of cut compactor and is generated with best condition for
extruder screw feeding. The degree of generating can be varied by
adjusting the load on the shredding motor.
Once the material has been fed into the extruder screw, it is
plasticized, the molten plastic is degassing by either atmosphere
venting or vacuum venting system(option).
The molten plastic now flows through the screen-changer which is
operated hydraulically, and leaves extruder screw through the
discharge or die. Some waste plastic contains high percentage of
moisture or heavy printed ink, in this case, second venting and
plasticizing device. I.e. By utilizing baby extruder is highly
recommended. Please refer diagrams showing next page, type H-SPH
and H-DCW.
On the request, self-clean back flush filter can be supplied as
option.
The molten plastic is flowed and cut by hot face water ring
pelletizer, delivered to centrifuge for drying. Then, pellet is
delivered to discharge cyclone through suction blowo(pellet
classifier can be installed before the suction blowero on request).
In addition to hot face water ring pelletizer, strand pelletizer
and under watering pelletizer can be supplied according to process
requirement(Please refer to diagram showing next page).
PE/PP roll, Bags, film scraps, buddle film, film sheet, shrink
film, garbage bags, stretch film, post-consumer bags, shopping
bags, PP non-woven bag pelletizing and recycling machine, cement
bag, rotajet bags, washed flakes recycling extruder machine
Why Choose Us
A.PR has professional manufacturer since 2006. we have our own
technical design department. Each extruder get designed according
to material feature.
B.Power saving with high output
C.Quality guaranty time is 12 months since the Bill of Lading date.
D.Delivery time: 40 work days to 60 days
E.Ship requested package
F.Machine installation is aboard available. It takes about 5 to 7
days with completing one time of installation. The assigned
engineer(s) manage the machine user training, machine operation and
commission
Machine Pictures
